Battery Status Indicator - Dreame R20 Ultra Benutzerhandbuch

Battery Status Indicator

EN
Status
The indicator is red after
turning on the vacuum.
The indicator blinks red
quickly when charging
the vacuum.
The indicator blinks
white when using the
vacuum.
Troubleshooting
If the vacuum is not working properly, the screen display will show an error message.
Please refer to the troubleshooting table to find your solution.
Error Icon
If one of the error codes from E1-E9, F0-F2 appears on the display, please contact the after-
sales service team for repair.
8
Possible Causes
Battery pack is
damaged.
The charger is
incompatible.
Out of Battery.
Status Error Message
Blinking Orange Air Duct Blocked
Blinking Orange Roller brush stuck
High-temperature
Blinking Red
Alert
Solutions
Please contact the after-
sales department for
maintenance.
Only use the original
charger to charge the
vacuum.
Please charge in time.
Solutions
Check whether the dust cup, extension rod, or
brush is blocked.
Check whether the filter or pre-filter is blocked
due to excessive dust.
Refer to the brush cleaning section to clean the
debris and hair tangled on the brush roller.
Please wait and continue to use after motor
temperature is normal.