Dreame R20 Ultra Benutzerhandbuch Seite 13

Product Overview
Accessories
1. Soft Dusting Brush
2. Motorized Mini-Brush
3. Charger
4. Extension Rod
5. Combination Tool
6. Extension Hose
7. Illumination Omni-Brush
Fig. A
Note: The illustrations in this manual are
indicative only. The actual product may
differ.
Component Names
Vacuum Body
1. Dust Cup
2. Dust Cup Release Button
3. Dust Cup Bottom Cover Release Button
4. Battery Pack Release Button
5. Display Screen
6. Standby Button
7. Suction Level Switch
8. Antistatic Contact
9. Charging Port
10. Battery Status Indicator
Fig. B
Installation
Installing the Accessories
Note:
• It is not recommended to use the
motorized mini-brush with the extension
rod.
• Please install the accessories according
to the actual cleaning needs.
Fig. C-1
Installing the Accessory
Storage Mount
Insert the support rod vertically into the
storage mount until you hear a click.
Note:
When not in use, the accessories can be
placed on the storage mount.
Fig. C-2
Charging
Fully charge the vacuum before
using it for the first time.
Note:
• The vacuum cannot be used while
charging.
• When fully charged, the battery status
indicator will turn off after 5 minutes and
the vacuum will enter the power saving
mode.
• This will take about 4 hours. Vacuuming
at Turbo mode for a prolonged period
will cause the battery to heat up, which
increases charging time. Allow the
vacuum to cool down for 30 minutes
before charging it.
Fig. D-1
EN
3