Silvercrest SIKL 40 A1 Kurzanleitung Seite 23

► When Bluetooth
playback within 10 minutes, the headphones
switch off.
► The headphones
Bluetooth
Bluetooth
the headphones
description of how to do this can be found in the operating manual
for your Bluetooth
► Ensure that the headphones
from the Bluetooth
barriers or electronic devices placed between them.
Switching the headphones on/off manually
♦ Press and hold the multifunction buttons
for about 2 seconds to turn on the headphones
♦ Press and hold the multifunction button
for about 4 seconds to turn off both headphones
Button functions for Bluetooth
Note
► The following playback functions are only available when the
headphones
other via Bluetooth
► It is possible that not all functions will be supported depending on the
smartphone used and its operating system.
► To use the voice control function, it must be set up on your smartphone.
You can find a detailed description of how to do this in the operating
instructions for your smartphone.
SIKL 40 A1
connection is established, if there is no
®
1
automatically reconnect to the last connected
playback device the next time it is switched on. If your
®
playback device does not automatically reconnect to
®
1
you will need to connect manually. A detailed
playback device.
®
1
playback device. Make sure that there are no
®
1
and the playback device are connected to each
.
®
1
are no more than 10 metres away
2
of both headphones
2
of one headphone
®
playback
GB │ IE │ NI
will automatically
1
.
1
1
.
│
19
1
■