Functional Description; Intended Use; Product Features - Bosch PST 700 PEL Originalbetriebsanleitung

OBJ_BUCH-354-005.book Page 20 Wednesday, February 20, 2008 10:44 AM
20 | English
Never use the machine with a damaged
cable. Do not touch the damaged cable and
pull the mains plug when the cable is dam-
aged while working. Damaged cables in-
crease the risk of an electric shock.
Instructions for Machines with Laser
Never make warning signs on the machine
unrecognisable.
Laser radiation class 2M
Do not stare into the laser beam
yourself or view directly at it
with optical instruments.
Do not direct the laser beam at
persons or animals and do not
stare into the laser beam your-
self. This power tool produces
laser class 2M laser radiation
according to IEC EN 60825-1.
A direct look into the laser beam, especially with
optically converging instruments such as binoc-
ulars etc., can cause damage to the eye.
Do not use the laser viewing glasses as safe-
ty goggles. The laser viewing glasses are
used for improved visualisation of the laser
beam, but they do not protect against laser
radiation.
Do not use the laser viewing glasses as sun
glasses or in traffic. The laser viewing glass-
es do not afford complete UV protection and
reduce colour perception.
Never allow children to operate the machine
without supervising them. They could unin-
tentionally blind other persons.
The laser module must be removed from the
power tool when used for stationary work
or when sawing from below a workpiece.
One can easily be blinded from the laser
beam when carrying out such work.

Functional Description

Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may
result in electric shock, fire and/or
serious injury.
1 609 929 L18 | (20.2.08)

Intended Use

The machine is intended for making separating
cuts and cut-outs in wood, plastic, metal, ce-
ramic plates and rubber while resting firmly on
the workpiece. It is suitable for straight and
curved cuts with mitre angles to 45°. The saw
blade recommendations are to be observed.

Product Features

The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Lock-on button for On/Off switch
2 On/Off switch
3 Vacuum hose*
4 Vacuum connection
5 Base plate
6 Adjusting lever for orbital action
(PST 700 PE/PST 700 PEL)
7 Switch for sawdust blowing device
8 Saw blade holder
9 Guide roller
10 Saw blade*
11 Dust cover for vacuuming*
12 Contact protector
13 Laser line On/Off switch
(PST 670 L/PST 700 PEL)
14 Laser module (PST 670 L/PST 700 PEL)
15 Batteries (PST 670 L/PST 700 PEL)
16 Battery lid (PST 670 L/PST 700 PEL)
17 Latch of battery lid (PST 670 L/PST 700 PEL)
18 Laser warning label (PST 670 L/PST 700 PEL)
19 Exit opening for laser beam
(PST 670 L/PST 700 PEL)
20 Laser viewing glasses*
21 Splinter guard*
22 Holder for guide roller (PST 670 L)
23 Screw
24 Base plate holder (PST 700 PE/PST 700 PEL)
25 Scale for mitre angle
26 Lead for the parallel guide
27 Locking screw for parallel guide*
28 Parallel guide with circle cutter*
29 Centring tip of the parallel guide*
*The accessories illustrated or described are not in-
cluded as standard delivery.
Bosch Power Tools