Manual Operation - Genius Action Bedienungsanleitung

ENGLISH

5. MANUAL OPERATION

If the gate has to be moved manually due to a malfunction of the
automated system, use the release device as follows:
• Fit the supplied Allen wrench in the front part of the operator
and turn it anti-clockwise for 5-6 turns (Fig. 11 Ref. 1).
• Lift the operator by its front end, detaching it from the fitting (Fig.
11 Ref.2) and remove the release key.
2
Unlock
1
6. RESTORING NORMAL OPERATION MODE
Procedure to relock the gate:
• Re-position the operator on the front fitting (Fig. 10);
• Fit and turn the release key clockwise until the operator reaches
the closing stop position.
• remove the release key.
2
Unlock
1
Fig.11
8