Werbung
Step 3: Extend the adjustable window kit the length
of your window. Connect the exhaust hose to the
window kit.
Step 4: Close your window to secure the kit in
place. It needs to hold the windows kit firmly in
place, secure the window kit with duct tape if
required. It is recommended that the gap between
the adapter and the sides of the window should be
sealed off for maximum efficiency.
Step 5: Attach the hose connector to the exhaust air
outlet of unit.
Step 6: Adjusting the length of the flexible exhaust
hose, to make sure the distance between the unit
and the window will be more than 70cm, height from
exhaust hose to the floor will be more than 90cm. And
avoid bends in the hose. Then place AC near an
electrical outlet.
Step 7: Adjust the louver at the air outlet, and then switch on the unit.
Werbung
