WARNING
Only the original screw may be used for this. A screw that is too long can damage the
integrated battery.
The headlight can pivot vertically and, for a few degrees, also horizontally. In both cases, the locking
screw of the bracket must be loosened.
Vertical: The slant of the headlamp depends on its position on the handlebar.
Horizontal: The headlight is allowed to pivot on the rubber ring (to a limited extent) continuously to the
left or right.
Mounting height according to regulations. In Germany, this ranges between 400 and 1,200 mm.
Lighting components must never be concealed during cycling!
No mounting underneath the handlebar: If the headlight is suspended underneath the handlebar, the
light field is reversed and oncoming traffic blinded which is a violation of traffic regulations. Also, we do
we assume any liability for possible splash water damage likely to occur when the headlight is mounted
underneath the handlebar.
WARNING
Avoid falls, accidents and serious injuries. Use only the pre-installed Busch+müller bicycle
light mounting brackets. Installing a bicycle light on a bicycle using brackets which are not suitable or
are positioned inappropriately, can lead to the light becoming loose, slipping and getting caught in the
spokes of the wheels.
22