Set Zero - Pce Instruments Pce-Mfm 3800 Bedienungsanleitung

6.2

Set Zero

Place the sensor probe in a place far away from any magnetic flux source.
There are two methods to reset the measurement to zero:
•
Using Set Zero in the measurement menu:
This option allows you to set the current measured value to zero. To use this feature, select
the Set zero option in the measurement menu. When you press the OK key, a dialogue will
appear on the screen to confirm if you want to perform the set to zero operation.
Use the LEFT or RIGHT navigation keys to choose an option and then press the OK key.
•
Using the BACK key:
It is possible to perform a zero adjustment by pressing the BACK key for 2 seconds in any
measurement screen. After pressing it, a dialogue is shown on the screen:
© PCE Instruments
47