Getting Started; Power Supply - Pce Instruments Pce-Mfm 3800 Bedienungsanleitung

3.3.3 Statistical screen
4

Getting started

4.1

Power supply

The meter is powered by an internal rechargeable LiPo battery. With a fully charged battery, an
operating time of approximately 20 to 24 hours is possible, depending on the brightness of the
display and the use of the data logger. The battery is charged via the USB socket at the bottom
of the meter, using a suitable USB charger.
The current charge level of the battery is displayed in the status bar at the top right. When the
battery charge level is insufficient for proper operation of the instrument, the meter automatically
switches off and displays the screen shown below.
The magnetic flux sensor is connected by simply plugging it into the socket provided at the top
of the device. It is disconnected by pulling the plug, touching the ribbed surface to release the
plug connection.
Automatic power off
© PCE Instruments
34