General Information - Gastros InductWarm 200 Built-in Betriebsanleitung

Because of the reflection heat of the dishes there is a high temperature above the induction area. Therefore a
cooling time of five minutes must be followed.
Do not put any melting materials on the heated surface.
It should be noted that necklaces and rings may heat up next to the induction field and cause burnings.
Because of the high temperatures which may occur and which can destroy the dish, there is a risk of burning,
when the dishes are running empty on the induction device.
Do not use any metal spoons in combination with the InductWarm
Before the InductWarm

General Information

Liability
The manufacturer's warranty covers all defects in design, production and materials. All other claims are excluded.
All data and notes in this instruction are prepared with consideration to the statutory standards and regulations. The
manufacturer will not be liable for:
➢
• Failure to observe the instructions
• Damages caused by inappropriate handling
• Deployment of unqualified staff
• Unauthorized modification
• Technical modifications ➢
• Use of uncertified spare parts
Please note:
Do not use the InductWarm
If you wear a pacemaker, check with your doctor whether you are allowed near an induction cooking
appliance.
Repairs
Repairs may only be carried out by authorised service personnel. Contact your dealer, a trained Gastros Switzerland
AG Service Partner or our customer service department. You can contact our customer service department at:
servicepoint@gastros.swiss
Warming with Induction
The induction coil (1) beneath the glass ceramic dish generates an alternating electromagnetic field (2) that produces
heat in the base of an induction dish item (3) through the principle of eddy currents. The automatic dish recognition
only switches on the generator when a pan is placed on the appliance.
22
200 please remove the caution sticker from the device. Otherwise it can cause fire.
®
200 appliance if you notice damage or malfunctions.
®
200 device.
®