Assembly And Safety Instructions - Gastros InductWarm 200 Built-in Betriebsanleitung

Assembly and Safety Instructions

• The assembler has to make sure, that the device is still approachable after installing to allow for maintenance.
• There must not be drawers, that are opened to the top, underneath the inductive elements.
• The maximum intake air temperature must not exceed 40°C in front of the cooling fans.
• Having a sufficient air supply system you have to ensure that already heated air does not get sucked in by the
devices again.
• Please handle the sensitive glass with great care as you can see scratches after installation.
• Maximum worktop thickness: 50 mm.
• There must not be any flammable nor explosive objects beneath the inductive elements.
• Please mind, that small parts can get sucked in.
• The devices must be installed / placed with a distance to the wall or the surface's foredge or additional devices of
at least 10 cm.
• The built-in device must be provided with enough space to the bottom side to ensure sufficient air ventilation.
• Please ensure that the removal of the plug is to be such that an operator can check from any of the points to
which he has access that the plug remains removed.
Overview Drawing
335 mm
592 mm
Anschluss Netzkabel
Power connection
25