Herunterladen Inhalt Inhalt Diese Seite drucken

General Information - Gastros InductWarm 130+ Betriebs- Und Montageanleitung

Warmhalten
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Symbol explanation:
This exclamation mark shows warnings.
This radiation warns of non-ionising electromagnetic radiation.
Risks
The InductWarm ® 130+ appliance may represent a source of danger, if the information in these operating instruc-
tions is not heeded, setup, maintenance or repair work is undertaken by non-authorised persons, or the Induct-
Warm ® 130+ appliance is used incorrectly or for purposes other than its intended use. Other risk may be:
Risk of destruction
When the induction surface is not only being used for warming, it is necessary to ensure that the devices are
turned off . Otherwise damage or burnings may occur.
Electrical shock
Do not expose this system to liquids or metal objects which may cause an electric shock.
Environmental conditions
The system must be mounted in a clean, dry indoor place and the relative humidity must not exceed 60%.
To avoid overheating, ensure good ventilation. The environmental temperature must not exceed 40°C.
Risk of burns
The used dishes are hot during operation and can cause burns. For touching the hot parts please use potholders
or gloves.
Because of the refl ection heat of the dishes there is a high temperature above the induction area. Therefore a
cooling time of fi ve minutes must be followed.
Do not put any melting materials on the heated surface.
It should be noted that necklaces and rings may heat up next to the induction fi eld and cause burnings.
Because of the high temperatures which may occur and which can destroy the dish, there is a risk of burning,
when the dishes are running empty on the induction device.
Do not use any metal spoons in combination with the InductWarm
Before the InductWarm

General Information

Liability
The manufacturer's warranty covers all defects in design, production and materials. All other claims are excluded.
All data and notes in this instruction are prepared with consideration to the statutory standards and regulations. The
manufacturer will not be liable for:
Failure to observe the instructions
Damages caused by inappropriate handling
Deployment of unqualifi ed staff
Unauthorized modifi cation
Technical modifi cations 
Use of uncertifi ed spare parts
22
®
130+ please remove the caution sticker from the device. Otherwise it can cause fi re.
®
130+ device.

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

8 13 200 00

Inhaltsverzeichnis