Initial Start-up
•
(1) Power on / off
•
(2) Lock touch panel for protection against unauthorised modification (to unlock the touch panel, touch both
button 2 and 5 at once)
•
(3a, 3b) Decrease or increase the overall temperature level of all zones combined
•
(4) Decrease or increase the temperature level of each warming zone
•
(5) Unlock touch panel (touching both button 2 and 5 at once)
•
(6) Infrared receiver
Touchpanel status LEDs
Temperature Level 1 (lowest temperature)
Temperature Level 2
Temperature Level 3
Temperature Level 4 (highest temperature)
Warning LED: The glass top might be hot from reflected heat by the warmed pot
Please note: The flashing of all LEDs at the same time indicates that too many buttons are touched at the same time.
Among other things, this can happen while cleaning, when a liquid lays on top of several buttons. The touch pa-
nel does not answer any user inputs while in cleaning mode. However, this does not have an effect on the warming
function.
Remote control controls
•
(1) Power on / off
•
(2) Lock / unlock touch panel
•
(3a, 3b) Decrease or increase the overall temperature level of all zones combined
•
(4) Decrease or increase the temperature level of the respective warming zone
Infrared receiver coverage / Optimum remote control position
The warming zones can be controlled with the remote control provided. The remote control must be held at a distance
between 5cm and a maximum of 40cm from the unit and within a 60° cone to the infrared receiver (6). Please note: A
lower battery capacity may lead to a closer range of the remote control.
18