Preparation; Information On The Batteries; Checking The Battery Charge Level; Inserting And Removing The Battery Into/From The Cordless Device - Parkside Performance 492560 2407 Originalbetriebsanleitung

GB MT
Only use accessor-
•
ies recommended
by PARKSIDE. Un-
suitable accessories
may cause electric
shock or fire.

Preparation

Information on the
batteries
• Switch off the device and remove
the battery from the device before
carrying out any work.
• The rechargeable battery only
reaches its full capacity once it has
been charged several times.
• Charge the battery before using it
for the first time.
Checking the battery
charge level
LEDs
red, orange, green Battery charged
red, orange
red
1. Press the button (2) next to the
charge level indicator button (3) on
the battery (4).
The LEDs of the charge level indic-
ator show how much charge re-
mains in the battery.
2. Charge the battery (4) when only the
red LED on the charge level indicat-
or (3) is illuminated.
30
Meaning
Battery partially
charged
Battery needs to
be charged
Inserting and removing the
battery into/from the cord-
less device
WARNING! Risk of injury due to
unintentional start-up. Do not insert
the plug into the outlet until the device
is fully prepared for use.Only insert the
battery into the device once the device
is fully prepared for use.
NOTICE! Risk of damage! An incorrect
battery can damage the device and
battery.
Inserting the battery
1. Push the battery (4) along the guide
into the battery holder.
You will hear the battery click into
place.
Removing the battery
1. Press and hold the battery release
(1) on the battery (4).
2. Pull the battery out of the battery
holder.

Operation

Control display

Meaning of the control indicators (7) on
the charger:
•
Red LED flashes: Battery charging
•
Yellow LED flashes: Battery < 80%
charged
•
Green LED flashes: Battery ≥ 80%
charged
•
Green LED illuminated: Battery
charged