EN
6.7. PARKING BRAKE
Place the gear shifter in the "N" position.
Depress the brake pedal to reduce speed until the tractor stops.
Move the blade engagement lever to the CLOSED "A" position.
Raise the parking lever to the "P" position, then release the
brake pedal.
6.8. EMPTYING THE COLLECTOR BAG
The collection bag is emptied only with the cutting
devices disengaged; otherwise, the engine stops . Do
not wait for the collection bag to fill up too much to avoid
clogging the drain.
•
Reduce engine speed;
•
Apply the parking brake if you are on a slope.
•
Grasp the lever on the back and lift the
collection bag up to empty it.
6.9. STOPPING
•
Bring the speed variator lever to the
minimum speed position.
•
Place the shifter in neutral (N). (for mechanical model
001M).
•
Move the blade engagement lever to the CLOSED
position (A).
•
Stop the engine by turning the ignition key to the Off
position and then remove the key.
19