Ruris RX PILOT 001M Bedienungsanleitung Seite 36

EN
For the Pilot 0002H model,
you need to fix the rear
lever with the nut (M6) as in
the adjacent figure.
5.2. STEERING WHEEL
INSTALLATION
First insert the sleeve into
the steering wheel shaft as
shown in figure 1, then
insert the decorative cover
as shown in figure 2, insert
the steering wheel and fix it
with the screw (M8x160)
and washer, install the
decorative cover as shown
in figure 3.
5.3. BULL BAR
INSTALLATION
Align the holes of the plate
with the holes on the front
of the machine and tighten
with the nut (M8) and screw
(M8x20).
10