Instructions For Use - Ruris Rx Pilot 001M Bedienungsanleitung

EN

6. INSTRUCTIONS FOR USE

Oil supply
Before starting the engine, fill the engine with RURIS 4T-MAX oil or an API classification oil: CI-4/SL or higher.
Engine oil bath capacity 0.5L
Check the engine oil level with the engine stopped and upright. Lift the seat, remove the protective cover.
Remove the oil dipstick and wipe it with a clean cloth. Insert and tighten the dipstick. Then remove it to check
the oil level. If the oil level is below the lower limit mark on the dipstick, top up with the recommended oil to the
upper limit mark. Do not overload. Reinstall the oil dipstick.
Fuel supply.
Use quality fuel from authorized Peco stations.
Fill with the best quality UNLEADED PETROL fuel, using a metal funnel, in open areas and away from sources
of fire or sparks that could cause a fire.
CAREFUL!
Do not feed on the ground or near plants, as you risk damaging the environment.
14