Ruris RX PILOT 001M Bedienungsanleitung Seite 44

EN
6.5. scale
Make sure the collection bag is properly installed.
Adjust the cutting height to the appropriate
position. The cutting height is adjustable from 30-
75 mm, positions 1 to 6.
Shift the speed variator lever to the full gear
position.
Position the blade engagement lever in the OPEN
"B" position.
6.6. REVERSE MOWING
Press the brake pedal until the machine stops;
Move the shift lever to the "N" position. (For
mechanical model 001M).
Position the blade engagement lever in the OPEN
"B" position.
Depress the blade engagement pedal when
reversing.
•
for mechanical model 001M move the shift
lever to the "R" position,
•
for hydraulic type model 002H press the rear
pedal.
18