Werbung
Verfügbare Sprachen
Verfügbare Sprachen
■
A damaged mains cable may only be replaced by the manufacturer, a workshop com-
missioned by the manufacturer or a similarly qualified person, so as to prevent any
danger.
■
Ensure that cables are not pinched, kinked or damaged by sharp edges.
■
Always lay cables so that nobody can trip over or become entangled in them. This poses
a risk of injury.
5.7 Connected devices
■
Also observe the safety and operating instructions of any other devices which are con-
nected to the product.
5.8 Product
WARNING
Risk of electric shock!
Always disconnect the product from the mains power supply before con-
nection, disconnection, cleaning, or troubleshooting.
6 Declaration of Conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau hereby declares that this
product is (are) in conformity with following directives, norms and/or regulations.
Model number: QSB-JH-400206A
MD directive 2006/42/EC
■
EN 60335-1:2012+A11+A13+A1+A14+A2+A15
■
EN IEC 60335-2-41:2021+A11
■
EN 62233:2008
■
EN ISO 12100:2010
■
AfPS GS 2019:01 PAK
■
EK1 566-13
■
EK1 527-12 Rev. 2
EMC directive 2014/30/EU
■
EN IEC 55014-1:2021; EN IEC 55014-2:2021
■
EN IEC 61000-3-2:2019/A1:2021 EN 61000-3-3:2013/A2:2021
RoHS directive 2011/65/EU + 2015/863/EU
Click on the following link to read the full text of the EU declaration of conformity:
www.conrad.com/downloads
Enter the product item number in the search box. You can then download the EU declaration
of conformity in the available languages.
7 Disposal
This symbol must appear on any electrical and electronic equipment placed on
the EU market. This symbol indicates that this device should not be disposed of
as unsorted municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose
of it separately from unsorted municipal waste. Spent batteries and accumulators,
which are not enclosed by the WEEE, as well as lamps that can be removed from
the WEEE in a non-destructive manner, must be removed by end users from the
WEEE in a non-destructive manner before it is handed over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free take-
back of waste. Conrad provides the following return options free of charge (more details on
our website):
■
in our Conrad offices
■
at the Conrad collection points
■
at the collection points of public waste management authorities or the collection points
set up by manufacturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply
in countries outside of Germany.
7
8 Product overview
1
2
3
4
1
Mode switch: Auto / Manual
3
Eyelet for retrieval line
5
3x screws: top cover
7
Handle
9
Non-return valve
11
Hose connector
13
Base plate
5
6
7
8
9
10
12
13
14
2
Water level induction pins
4
Power cable
6
Air exhaust
8
Air exhaust
10
Adaptor
12
Water inlet
14
8x screws: base plate
11
Werbung
