Aiper Scuba X1 Pro Bedienungsanleitung Seite 55

2. Once removed, take the replacement roller brush and align the silicone buckles with
the slots. Press the buckles into each slot to secure the new roller brush to your
device. Repeat this step for the other roller brush.
4.5 Powering O and Storing Your Aiper
During o -seasons, such as winter or long vacations, when your Aiper device isn't in
use, follow these steps to keep it in top shape:
1. Fully charge the device before storing it. Ensure the device is turned o and
disconnected from the charger before storing.
2. Thoroughly clean the entire device, including the top and bottom shells, wheels,
brushes, and charging port to remove any dirt.
3. Dry the device with a tissue or soft cloth, and ensure the charging port cover is
properly closed.
4. Store the device in its original packaging in a cool, dry, and well-ventilated place.
5. Recharge the battery every six months to maintain its health.
169