Aiper Scuba X1 Pro Bedienungsanleitung Seite 42

3.5 Button Descriptions
Mode Button
Change and select
cleaning mode.
Combination Button Functions:
•
Network Setup Mode: Press and hold
buttons and
simultaneously for 5 seconds to
enter network setup mode. The
device will stay in network steup
mode for 300 seconds, so be sure to
complete the setup quickly.
Aside from the above cleaning modes, if all the LED mode indicators are constantly lit,
it indicates that the device is performing a custom task.
Power Button
Turn device On/O .
•
Factory Reset: Press and hold
buttons
5 seconds to reset the device to
factory settings. This will erase all
user settings, cleaning data, and
personalized settings.
156
Cleaning Power Button
Increase or decrease
cleaning power.
and simultaneously for