Aiper Scuba X1 Pro Bedienungsanleitung Seite 52

•
It is advisable to use a high-pressure water gun to clean the replaceable MicroMesh™
ultra-fine filter and the filter box to ensure thorough cleaning.
•
After several uses, the surface of the replaceable MicroMesh™ ultra-fine filter may
show signs of wear, which does not impact its performance.
•
The replaceable MicroMesh™ ultra-fine filter is a consumable item and should be
replaced every 30 uses to maintain e ective filtration.
4.2 Cleaning the Propeller
1. Use a flathead screwdriver to pry
open the drain cover.
3. Remove any debris entangled in
the propeller.
2. After removing the drain cover, remove
the propeller cover to expose the
propeller.
1
4. After cleaning the propeller, reattach
the propeller cover followed by the
drain cover.
1
166
2
2