Notes:
•
If you're unsure about the pool's turbidity, it's recommended to use the AUTO
cleaning intensity. AUTO mode automatically adjusts the cleaning performance
based on the pool's condition, ensuring the X1 Pro provides e ective cleaning while
optimizing battery life.
•
If the pool water has high turbidity and there are noticeable flocs or debris, it's
recommended to use the MAX cleaning intensity. MAX mode enhances cleaning
performance while it increases the X1 Pro's power consumption, which may shorten
battery life.
•
If the pool water has low turbidity and there is minimal visible debris, it's
recommended to use the ECO cleaning intensity. ECO mode reduces the X1 Pro's
power consumption, extending battery life.
3.8 Choosing Filter
Two filters of di erent thickness are provided: replaceable MicroMesh™ ultra-fine filter
and filter box.
The replaceable MicroMesh™ ultra-fine filter can trap particles as small as 3-10 m,
such as silt and some algae. When visible debris is minimal (e.g., stones, leaves, sand,
debris, hair) and the water appears cloudy or some algae, it is recommended to use
both the filter box and the replaceable MicroMesh™ ultra-fine filter.
If there is a significant amount of visible debris, it is recommended to use only the
filter box and not use the replaceable MicroMesh™ ultra-fine filter.
Filter Box
3.9 Cleaning Process
1. Press and hold the
seconds to turn on/o the device.
Button for 2
158
Replaceable MicroMesh™
Ultra-fine Filter