Create Thera Studio Bedienungsanleitung Seite 9

3. Press the power button
begin to preheat, after approximately 45 seconds the preheating
will be complete and the three lights will remain on.
4. Place a glass or cup on top of the tray.
5. Select the adapter you want to use to brew your coffee.
6. Press the short coffee button
Note: Before pressing the button, make sure the adapter changing lever is closed with the
adapter fully seated.
A DA PTE R FOR DOLCE GUSTO CAP S ULE S
1. Take the Dolce Gusto capsule adapter and place the capsule inside.
2. Lift the opening lever to change adapters and place the adapter inside the coffee maker,
then lower the lever again.
3. Place a cup or glass on top of the coffee maker tray.
4. Press the desired coffee volume button and wait until the coffee is brewed. If you want a
smaller amount of coffee, press the button again and the machine will stop making coffee.
Note: When you press the button, the button light will flash for a few seconds before brewing
begins. The flashing corresponds to the warm-up state of the machine, which is a normal
phenomenon.
A DA PTE R FOR NE SP RE S SO CAP SU LE S
1. Open the lid of the capsule adapter.
2. Place the Nespresso capsule inside and close the adapter cover again.
3. Lift the opening lever to change adapters and place the adapter inside the coffee maker,
then lower the lever again.
4. Place a cup or glass on top of the coffee maker tray.
5. Press the desired coffee volume button and wait until the coffee is brewed. If you want a
smaller amount of coffee, press the button again and the machine will stop making coffee.
Note: When you press the button, the button light will flash for a few seconds before brewing
begins. The flashing corresponds to the warm-up state of the machine, which is a normal
phenomenon.
from the coffee maker. The machine will
or long coffee
SELECT THE ADAPTER
and wait for the machine to start working.
E NGLI SH
9