Create Thera Studio Bedienungsanleitung Seite 8

1
2
3
4
5
1. Control buttons
On, short coffee and long coffee
2. Opening lever for changing adapters
3. Compartment for adapters
4. Rack
5. Waste deposit
6. Water tank cover
Before using your machine for the first time, pay attention to the basic safety precautions in
this manual, in particular the following:
• Be careful with hot water. You could get burned.
• Rinse the water tank thoroughly with clean water before first use or if the machine has not
been used for a long time.
• Do not use the machine with the water tank empty or if the water level is below the
minimum.
• Only use the machine in a dry room.
• Do not open the release lever when the machine is warming up or operating.
• Always unplug the power cord before cleaning the machine.
• Clean the coffee machine only with a damp cloth.
1. Fill the water tank.
• Lift the water tank cover.
• Pour a maximum of 0.6 litres of water into the water tank (with
a water temperature not exceeding 35ºC).
• Then replace the cap on the tank.
2. Connect the plug to the power supply.
E NGL I SH
8
PARTS LIST
USING THE MACHINE FOR THE FIRST TIME
6
8
7
9
7. Water tank
8. Drain accessory
9. Measuring spoon
10. Adapter for Dolce Gusto capsules
11. Adapter for Nespresso capsules
12. Adapter for ground coffee
10
11
12