VEVOR RC-8238 Bedienungsanleitung Seite 8

OPERATING INSTRUCTIONS
Before using the appliance for the first time, peel off any promotional materials and
packaging materials, and check that the product are clean and free of dust. If
necessary, wipe them over with a damp cloth. Spread over with an absorbent
kitchen towel and wipe off any excess oil. When your appliance is heated for the
first time, it may emit slight smoke or odor, which is normal for many heating
appliances, and will not affect the safety of your appliance. Place the machine
on a clean, dry, level surface near a plug base outlet.
1. Make sure the popcorn maker is unplugged before you do any of the following.
2. Before operation, please check carefully if its voltage is suitable to your country.
(Please check if the voltage is matching with rating label specified next to the
power cord).
3. Clean the internal surface of the kettle and the external surface of the main unit.
4 .The main unit has 3 function switches as follows:
Spot Light and Warmer ( I )
Stirrer (II)
Stainless Steel Kettle Heater ( III )
5. Hook up the kettle onto the hanger of the main unit.
6. Plug in the power cord to the popcorn maker.
7. Switch on the light and heater ( I & III ), and then fill in suitable amount of butter
or oil (Shown as Fig.1).You can fill the amount of oil (Max.15g) subject to your own
preference.
- 7 -