Next Level Racing ELITE Serie Bedienungsanleitung Seite 10

A) B)
A) Align the identified Seat Slider rear mounting slots with the threaded inserts on the frame.
34
B) Bolt through and hand tighten to help align the front Seat Rail holes on the cockpit in Step 36
with M8 Low Profile Bolts.
Lift the Seat Slider Lever and slide the ELITE SERIES Seat all the way back to access the front
35
mounting holes on the Seat Slider.
A) B)
A) Align the identified Seat Slider front mounting holes from Step 33B with the inserts in the
36
frame.
B) Bolt through and secure with M8 Low Profile Bolts. Then secure the Bolts from Step 34.
18
PARTS:
• • 2 x M8 16mm Low Profile Bolts
PARTS:
• • NIL
PARTS:
• • 2 x M8 16mm Low Profile Bolts
Repeat
on Other
Side
37
Your installation on the GTTrack is complete.
NLR F-GT ASSEMBLY
NOTE: The ELITE SERIES Seat
installation is not compatible
with the F-GT Shifter Assembly
installed on the F-GT Cockpit.
Uninstall the Bolts, Washers and Nuts securing the Shifter to the frame and remove the Shifter
38
Assembly.
A) B)
A) Lift the Seat Slider Lever and slide the Seat all the way back to access the rear Bolts.
39
B) Uninstall the rear M8 Bolts securing the Seat Rails to the Seat.
19
PARTS:
• • NIL
PARTS:
• • NIL
PARTS:
• • NIL