2.Transmission oil change
1.Place the tiller on a level surface.
2.Remove the oil filler cap and drain bolt to drain.
3.Install the drain bolt. Fill the transmission with same oil as the engine
oil (see page 14) up to the level. Install the oil filler cap.
Oil capacity: 3.5 L (3.7 US qt, 3.1 lmp qt)
OIL FILLER CAP
DRAIN BOLT
Wash your hands with soap and water after handling used oil.
NOTE:
Please dispose of used motor oil in a manner that is compatible with
the environment. We suggest you take it in a sealed container to your
local service station for reclamation. Do not throw it in the trash or pour
it on the ground.
40