VEVOR RFS-065 Handbuch Seite 9

STEP3:
Install the adjustment component
Prepare the following items.
B-M6x35 screws
L-armrest (including pre-installed control module)*1
*6
M-armrest link*4
C-gear lever*1
D-split pin*1
Connect the M-armrest links in pairs and then connect them to the L-armrest. Align
the holes of the M-armrest links, K-support pole and Q-main framework, and
tighten them with B-M6x35 screws.
Insert the C-gear lever without a pin into the hole of the adjustment handle, and
clamp the pin between the adjustment handle and the adjustment dial. Then, insert
the C-gear lever into the hole of the P-powder baffle and fix it with the D-split pin.
7