ISDT 608PD Bedienungsanleitung Seite 17

When it is necessary, you can connect your 608PD charger with a RC battery to
charge any electronic devices supporting PD protocol or USB-C.
Steps: First, connect the charging cable and the balance cable,
short press the center key to enter the interface of modifying the minimum voltage
limit of the battery, please see the following picture (The left is with balancing cable
connected, the right is without balancing cable connected), short press OK to save
and start the task, long press to cancel the save and return to the main page.
Please connect the USB power device after the task starts.
While the charger is working, the display can be switched using the left and
right keys. The voltage per cell of the battery can only be displayed when the
balance cable is connected: The internal resistance screen can only be displayed
Sign;
when the charging constant current stage is in progress.
arging: ;
ll turn green
This product supports PD2.0/3.0/3.1 input and output, and can be used to charge
phones and other electrical devices with a RC battery;
er supply:
It can also be charged for the RC battery by ordinary adapter;
or charged through DC power and batteries.