Returning The Device - Afriso Rf Ex Serie Betriebsanleitung

11 Troubleshooting
Malfunctions may only be repaired by the manufacturer.
12 Decommissioning, disposal
Dispose of the product in compliance with all applicable directives, standards
and safety regulations.
The standard liquid filling for Bourdon tube pressure gauges and capsule
pressure gauges is glycerine (99.5 %). Products with glycerine filling do not
have special marks. If other liquids are used, a corresponding note providing
information on the filling liquid is attached to the product.
Filling liquid
Glycerine (99.5 %)
Silicone oil
Paraffin oil
13

Returning the device

Get in touch with us before returning your product (service@afriso.de).
14 Warranty
See our terms and conditions at www.afriso.com or your purchase contract
for information on warranty.
Troubleshooting
1. Dismount the product (see chapter "Mounting", reverse
sequence of steps).
2. Drain the product if it has a liquid filling. Open the plug at
the edge of the housing and completely empty the prod-
uct.
3. Dispose of the liquid in compliance with all applicable
directives, standards and safety regulations.
4. Dispose of the product.
European Waste Catalogue
(EWC) code no.
13 02 08
13 02 08
13 02 08
RF ... EX / KP ... EX
EN
36