Emptying The Grass Bag - Honda HRD536CTXEA Betriebsanleitung

NOTE: If the lawn mower speed is too low when cutting on a slope,
move the shift lever slightly towards the "FAST" position.
CONTROLS AND MOWING
PROCEDURES
Read the safety instructions before
SAFETY
starting
to mow.
To mow:
1. Place the mower in an obstacle free area.
2. Start the engine, allow it to reach its maximum temperature and
rotation speed. (The engine runs evenly when the throttle
control lever is moved away from the "CHOKE" position).
3. Select the required forward speed using the shift lever [1].
2°
1°
3°
2
3
1
The following forward speeds are available:
Types 1st 2nd
HXEA -
TXEA 0.8 m/s 1.2 m/s
4. Engage the blade: press the
yellow button [2] situated on
the top of the blade clutch
lever [3], then at the same
time push the lever forwards
and hold it against the
handle.
CAUTION:
• Move the blade clutch lever [3] quickly and completely so that
the clutch is always totally engaged or disengaged. The purpose
of this is to avoid stalling the engine and prolongs the lifetime of
the blade clutch mechanism. Always release the blade clutch
lever and the drive clutch before starting the engine. When the
blade drive is engaged, starting is not as easy. If the drive clutch
is engaged, the lawn mower moves when started.
5. Wait for the engine to get up to speed before starting cutting.
6. To cut in self propulsion,
push the drive clutch lever [4]
against the handle and hold it
there.
NOTE:
• The drive clutch lever [4] acts as a variable speed unit according
to its position. It can vary the speed between zero and the
maximum speed preselected with the shift lever. The maximum
speed is reached when the shift lever is put on the maximum
speed and the clutch lever is held against the handle.
SAFETY
[1]
H.S.T.
3rd Mini
- - 0
1.3 m/s -
[3]
[4]
7. To stop the mower moving, release the clutch lever [4].
8. To stop the blade rotating, release the blade clutch control
lever [3].
NOTE:
C6
• Mowing frequency: once a week for a
lawn intended for leisure purposes,
C7 C8
twice a week for an ornamental lawn.
• If possible, mow the lawn in the
afternoon or evening before sprinkling,
as the grass must be dry. If dust levels
are too high, mow the lawn when the
grass is dry, but the ground is still
damp.
• Choose a cutting height adapted to the
terrain (see page
• For a regular cut, you should overlap
the part that has already been cut by a
[1]
few centimetres [5], and increase this
overlap zone if the cutting height is
high.
• To achieve maximum efficiency, follow
the suggested path.
• If your terrain does not have a regular shape or involves several
obstacles, divide it into internal parcels which you can mow in the
recommended direction.
[6] With collection: turn in a
Maxi
clockwise direction to
1.4 m/s
achieve the maximum
efficiency.
-
[7] With the mulching kit
(optional,
[4]
turn in an anti-clockwise
direction.
[2]
[3]

EMPTYING THE GRASS BAG

When the grass bag becomes too
full, grass collection is no longer
efficient (the sound of the mower
changes and the bag is no longer
puffed up by the air from the
blade).
1. Stop the engine.
2. Remove the grass bag
(see page
3. Empty the bag:
• Hold the bag by the
handle [8].
• Grasp the bag rear side [9]
and shake it to remove the
grass.
4. Reinstall the grass bag on the
mower
CAUTION:
• To reduce the fire risk, never leave grass cuttings or leaves in the
grass bag, or in or near buildings. Decomposing vegetable matter
causes a high temperature rise.
Make sure that the grass bag fastener is securely closed before
use (discharge guard).
4).
see page 13):
4).
(see page 4).
[5]
[6] [7]
C11
SAFETY
[9]
7 EN
[8]