Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 29
FOREWORD
Dear Honda User,
You have just purchased a Honda lawn mower and we thank you
for your confidence in us.
This manual has been written to familiarise you with your mower, to
enable you to use it in the best possible conditions and to carry out
its maintenance.
Our aim is to make you benefit to the full from technological
advances, from new equipment and materials and from our
experience. This is why we regularly make improvements to our
models. Thus, the specifications and information contained in this
manual may be modified without prior notice and without obligation
to update it.
The illustrations of this manual are based on the most significant
model, according to the described subject.
If you have a problem, or if you have any questions concerning the
mower, contact your supplying dealer or approved Honda dealer.
Keep this manual handy so you can consult it at any time. If you sell
the mower be sure that the manual accompanies it.
We recommend that you read the guarantee policy to fully
understand your rights and responsibilities. The guarantee policy is
a separate document provided by your dealer.
No reproduction, even partial, may be made of this publication
without prior written authorisation.
SAFETY INSTRUCTIONS
For your own safety and operating comfort, it is highly recom-
mended that you read this manual in full.
Pay attention to these symbols and their meaning:
Indicates a high risk of severe personal injury or death if
instructions are not followed.
CAUTION:
• Indicates a possibility of personel injury or equipment damage if
instructions are not followed.
NOTE: Source of usefull information.
DESCRIPTION OF THE CODES USED IN THIS
MANUAL
HRD536C
Hydrostatic drive self-propelled. . . . . . . . . . . . . . .
Mechanical drive self-propelled (3-speed) . . . . . .
Rotostop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The model of your machine is indicated on its "identification label",
by a series of letters and figures
Write down your machine's serial number here
Write down your machine's model here
2009 - Honda France Manufacturing S.A.S. - Pôle 45 - Rue des Châtaigniers
45140 ORMES - FRANCE - All rights reserved
3RVF0610
00X3R-VF0-6100
HRD536C3
H
X
E
A
(see page
3).
Printed in France
OWNER'S MANUAL
T
X
E
A
CONTENTS
Foreword . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Safety stickers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Identification of machine . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
General description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Preparation and checks before use . . . . . . . . . . . . . . . . . . 4
Starting and stopping the engine . . . . . . . . . . . . . . . . . . . . 6
Operating hints and tips . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Transport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Useful information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Technical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Major Honda distributor addresses . . . . . . . . . . . . . . . . . . 15
"EC Declaration of Conformity" CONTENT OUTLINE . . . 16
0813
Original instructions
HRD536C
Lawn mowers
1 EN

Werbung

Inhaltsverzeichnis
loading

Inhaltszusammenfassung für Honda HRD536CTXEA

  • Seite 1: Inhaltsverzeichnis

    Technical specifications ......14 Major Honda distributor addresses ....15 “EC Declaration of Conformity”...
  • Seite 2: Safety Instructions

    D7. Do not use the machine with worn or damaged parts. Parts must be replaced, not repaired. Replace worn or damaged parts with Honda genuine parts. Blades must OPERATION always bear the mark Honda and the reference number.
  • Seite 3: Safety Stickers

    [17] [20] These decals are considered as a part of the mower. Should one [31] [30] become detached or unreadable, contact your Honda dealer for its [33] replacement. We also recommend that you read the safety advice on carefully [27]...
  • Seite 4: Preparation And Checks Before Use

    If you intend to use fuel with alcohol, ensure that its octane number Bag removal: is at least as high as that recommended by Honda (86). There are 1. Stop the engine. two types of fuel/alcohol mixtures: one contains ethanol and the 2.
  • Seite 5 • The engine may be seriously damaged if run with insufficient oil. • Check if the blade [4] shows We recommend the use of Honda 4-stroke oil or an equivalent signs of wear or damage and quality engine oil which is highly detergent. Oil viscosity must be replace it if necessary.
  • Seite 6: Starting And Stopping The Engine

    1 800 metres above sea level, we recommend that you have these temperature is high. modifications made by your approved Honda dealer. Even with the appropriate modifications made to the carburettor, engine power 3. Hold the handle firmly with one will be reduced by about 3.5 % for every 300 metres of altitude.
  • Seite 7: Emptying The Grass Bag

    7. To stop the mower moving, release the clutch lever [4]. NOTE: If the lawn mower speed is too low when cutting on a slope, 8. To stop the blade rotating, release the blade clutch control move the shift lever slightly towards the “FAST” position. lever [3].
  • Seite 8: Maintenance

    1. Remove the filler cap [6]. CAUTION: • Use only genuine Honda parts or their equivalent for maintenance 2. Tip the mower on its side. or repair. Replacement parts which are not of equivalent quality may damage the mower.
  • Seite 9: Carburetor Adjustment

    In some regions, it is prohibited to operate an engine without a spark arrester. Check local regulations before using your 4. Start the engine outdoors and mower. A spark arrester is available on option from Honda engage the blade clutch lever. dealers.
  • Seite 10: Cutting Blade

    Maximum = 1.3 m/s at an engine speed CAUTION: of 2 800 rpm. • Blade balance is critical to proper mower performance. Replace any blade that is damaged or out of balance. • Use only a genuine Honda replacement blade or equivalent. 10 EN...
  • Seite 11: Maintenance Schedule

    (1) Increase cleaning frequency when mower is used in dusty areas. 1. Detach the plastic (2) Maintenance of these points must be carried out by a Honda dealer. edges [6] of the worn (3) For professional commercial use, log hours of operation to determine proper bag [7] and remove the bag maintenance intervals.
  • Seite 12: Troubleshooting

    (*) Maintenance of these points must be entrusted to an approved Old petrol will cause hard starting, and it leaves gum deposits that Honda dealer unless the user has the necessary tools and is clog the fuel system. If the petrol in your engine deteriorates mechanically competent.
  • Seite 13: Transport

    2. Pull off the spark plug cap. 3. Close the fuel shut-off valve To buy one of the original parts listed below, or any other part, [1]. To facilitate the please contact an approved Honda reseller. operation, remove the grass HRD536C (see page...
  • Seite 14: Technical Specifications

    (2.9 - 4.3 - 4.7 km/h) Lubrication Recommended lubricant Honda HST Oil 15W30 API: CD/SF Oil capacity (*) The power rating of the engine indicated in this document is the net power output tested on a production engine for the engine model GCV160A and measured in accordance with SAE J1349 at 3 600 rpm (Net Power).
  • Seite 15: Introduction

    « Déclaration de conformité CE » ....16  2009 - Honda France Manufacturing S.A.S. - Pôle 45 - Rue des Châtaigniers 45140 ORMES - FRANCE - Tous droits réservés Imprimé...
  • Seite 16: Consignes De Sécurité

    être remplacées et non pas réparées. Utiliser des pièces d'origine Honda. coupe pour s'assurer qu'ils ne sont ni usés ni endommagés. Remplacer les pièces Les lames doivent toujours porter la marque Honda ainsi que la référence. Des endommagées ou usées par lots complets pour préserver le bon équilibrage.
  • Seite 17: Étiquettes De Sécurité

    [25] Bouchon-jauge de remplissage Honda France Manufacturing S.A.S. d'huile ....Permet le remplissage et le contrôle du Rue des Châtaigniers - Pôle 45 [16] niveau d'huile moteur.
  • Seite 18: Préparation Et Vérifications Avant Utilisation

    Si vous avez l’intention d’employer de l’essence contenant de l’alcool, assurez-vous que son indice d’octane est au moins aussi Retrait du sac : élevé que celui que recommande Honda (86). Il existe deux types 1. Arrêter le moteur. de mélange essence/alcool : l’un contenant de l’alcool éthylique et 2.
  • Seite 19 [A], de telle sorte que le gravement endommager ce dernier. Il est recommandé carburateur soit orienté vers le d'employer une huile Honda 4 temps ou encore une huile pour haut (côté gauche). moteur de qualité équivalente et hautement détergente. Il •...
  • Seite 20: Mise En Marche Et Arrêt Du Moteur

    1 800 mètres au-dessus du niveau de la mer, il est recommandé de de l'autre main, jusqu'à sentir faire exécuter ces modifications sur le carburateur par votre concessionnaire Honda agréé. Même avec les modifications une résistance ; puis tirer appropriées apportées au carburateur, la puissance du moteur vivement.
  • Seite 21: Vidage Du Sac De Ramassage

    7. Pour arrêter l'avancement de la tondeuse, relâcher le levier NOTE : Si la vitesse de la tondeuse est trop réduite lorsque l'on tond d'embrayage d'avancement [4]. sur une pente, déplacer légèrement le levier de changement de vitesse vers la position « RAPIDE ». 8.
  • Seite 22: Entretien

    • Pour l'entretien ou les réparations, n'employer que des pièces 2. Basculer la tondeuse sur le Honda d'origine. Des pièces de rechange qui ne seraient pas de côté. même qualité pourraient endommager la tondeuse. 3. Placer un récipient [7] sous •...
  • Seite 23: Réglage Du Carburateur

    Étudier les réglementations locales avant d'utiliser votre tondeuse. Un pare-étincelles en 4. Démarrer le moteur à l'extérieur option est disponible auprès de votre concessionnaire Honda. et engager le levier d'embrayage de lame. Vérifier que la lame se met en route lorsque l'on pousse le levier et s'arrête rapidement...
  • Seite 24 • L'équilibre de la lame est essentiel pour obtenir de bonnes performances de coupe. Il faut donc changer toute lame qui serait endommagée ou dont l'équilibre ne peut être rétabli. • N'utiliser qu'une lame de rechange d'origine Honda. 10 FR...
  • Seite 25: Calendrier D'entretien

    [7] du cadre [8]. poussiéreuses. 2. Monter un sac neuf en (2) L’entretien de ces points doit être confié à un concessionnaire agréé Honda. suivant les instructions de (3) Pour les machines à usage professionnel, noter les heures de fonctionnement page 4 de ce manuel.
  • Seite 26: Dépistage Des Pannes

    (*) L’entretien de ces points doit être confié à un concessionnaire • Prenez soin d'utiliser des agréé Honda, à moins que l’utilisateur ne dispose des outils contenants ou bidons necessaires et soit mécaniquement compétent. spécifiquement conçus pour les hydrocarbures [6].
  • Seite 27: Réutilisation Après Remisage

    PIÈCES COURANTES, ACCESSOIRES EN OPTION enlever la clé de contact ET CONSOMMABLES pour les modèles équipés. Prendre contact avec un revendeur agrée Honda pour acheter une 2. Enlever le capuchon de la des pièces d’origine listées ci-dessous, ou pour toute autre pièce. bougie.
  • Seite 28: Spécifications Techniques

    (2,9 - 4,3 - 4,7 km/h) Lubrification Huile Lubrifiant recommandé Honda HST huile 15W30 API: CD/SF Capacité d’huile (*) La puissance nominale du moteur indiquée dans le présent document est la puissance nette testée sur un exemplaire de série du moteur modèle GCV160A et mesurée conformément à...
  • Seite 29: Einführung

    Adressen derwichtigsten Honda-Haupthändler..15 „EG-Konformitätserklärung“ INHALTSÜBERSICHT ..16 Hier das Modell Ihrer Maschine eintragen 2009 - Honda France Manufacturing S.A.S. - Pôle 45 - Rue des Châtaigniers 45140 ORMES - FRANCE - Alle Rechte vorbehalten Gedruckt in Frankreich...
  • Seite 30: Sicherheitshinweise

    Verwenden Sie dazu Originalteile von Honda. Die Schneidmesser müssen immer zum Schneidmesser ein, der durch die Länge der Lenkstange gegeben ist. mit der Marke Honda sowie einer Referenz gekennzeichnet sein. Teile anderer C5. Achten Sie darauf, daß Sie beim Mähen gehen und nicht laufen. Lassen Sie sich Güte können zu Schäden am Gerät führen und Ihre Sicherheit beeinträchtigen.
  • Seite 31: Sicherheitsaufkleber

    Diese Aufkleber sind als Teil des Mähers zu betrachten. Sollte eines [20] [31] [30] davon nicht angebracht oder nicht deutlich lesbar sein, setzen Sie sich bitte zwecks Ersatz mit Ihrem Honda-Händler in Verbindung. [33] Wir weisen auch noch einmal ausdrücklich auf die Sicherhelt- [27] [21] sanweisungen hin, die Sie im nächsten Kapitel der Bedienung-...
  • Seite 32: Vorbeitungen Und Kontrollen Vor Inbetriebnahme

    ALKOHOLHALTIGES BENZIN Abnehmen des Grassacks: Wenn Sie alkoholhaltiges Benzin verwenden, muß seine Oktanzahl 1. Motor stoppen. mindestens der von Honda vorgeschriebenen entsprechen (86). Es gibt zwei Arten von Benzin/Alkohol-Gemischen: das eine enthält 2. Deckel [8] anheben, Äthylalkohol, das andere Methylalkohol.
  • Seite 33: Kontrolle Des Luftfilters

    3. Legen Sie den Mäher auf die verursacht schwere Schäden am Motor. Verwenden Sie Original Seite [A], so daß der Vergaser Honda Motoröl oder Markenöle für Viertakt Motoren mit SAE- nach oben zeigt (linke Seite). Viskosität 10W30. Den optimalen Viskositätsgrad finden Sie je nach Lufttemperatur und Höhenlage des Rasengeländes aus...
  • Seite 34: Anlassen Und Abschalten Des Motors

    4. Ziehen Sie den Anlasserseilzug Die Motorleistung ist schwächer und der Verbrauch sehr hoch. In [3] langsam mit der anderen diesem Sonderfall lassen Sie bitte von Ihrem Honda-Fachgeschäft Hand, bis Sie einen Widerstand eine Vergaserdüse mit kleinerem Durchmesser einbauen und die spüren;...
  • Seite 35: Bedienung Der Stellteile

    7. Fahrantrieb durch Loslassen des Hebels ausschalten [4]. HINWEIS: Falls die Einstellung der Geschwindigkeit für das Mähen 8. Mähantrieb durch Loslassen des Messerkuplungshebels [3] am Hang zu niedrig ist, kann der Schalthebel leicht in Richtung auf Position „SCHNELL“ bewegt werden. abschalten.
  • Seite 36: Wartung

    Verschmutzte Luftfilter verringern die Motorleistung durch zu geringe Luftzufuhr zum Vergaser. Regelmäßige Kontrolle, besonders in staubiger Atmosphäre ist daher unerläßlich. ZÜNDKERZENWECHSEL Empfohlene Zündkerze: NGK - BPR5ES Honda-Trockenfiltersätze nicht in Benzin reinigen! VORSICHT: 1. Die Verriegelung [2] • Nur die vorgeschriebene Kerzentype verwenden! Ungeeignete Luftfilter Deckels [3] Kerzen können den Motor beschädigen.
  • Seite 37: Vergasereinstellung

    SICHERHEIT VORSICHT: entfernen. Hellen Keramik-Isolator prüfen: falls er Sprünge • Fragen Sie Ihren Honda- Händler falls Sie nicht über die aufweist, darf die Kerze nicht wieder eingebaut werden! erforderliche Erfahrung oder Ausrüstung verfügen. 3. Gemäß Abbildung den Elektrodenabstand messen. Er soll zwischen 0,7 und 0,8 mm liegen.
  • Seite 38: Einstellung Des Fahrantriebshebels

    Messer auswechseln, wenn das Ungleichgewicht zu groß ist. Motorleistung von 2 800 U/min. VORSICHT: • Die Auswuchten des Messers ist entscheidend für gute Leistungen des Rasenmähers. Ersetzen Sie alle Messer, die beschädigt sind oder eine Unwucht aufwelsen. • Verwenden Sie nur Original-Honda-Ersatzmesser. 10 DE...
  • Seite 39: Messer-Einbau

    (1) Bei Lagerung an staubigen Orten sind die Intervalle zu verkürzen. untersucht werden. Abgenutzten Sack nur durch neuen Original (2) Diese Teile müssen von einem Honda-Vertragshändler gewartet werden. Honda Sack ersetzen! (3) Bei professionellem Einsatz. Betriebsstundenbuch zur Bestimmung der genauen 1.
  • Seite 40: Störungsbeseitigung

    Bestandteile der Treibstoffanlage unter Umständen gewartet oder ausgewechselt werden. (*) Überlassen Sie die Störungsbeseitigung einem autorisierten • Benutzen Sie ausschließlich Honda-Fachhändler-es sei denn, Sie besitzen das nötige spezielle Treibstoffbehälter Werkzeug und sind technisch versiert. oder -kanister [6]. So vermeiden Sie, dass der Treibstoff durch Partikel verunreinigt wird, die sich von den Behälterwänden...
  • Seite 41: Gerätetransport

    1. Gashebel auf die „STOPP“- STANDARDTEILE, SONDERAUSSTATTUNG UND Position stellen und bei VERBRAUCHSZUBEHÖR Mähern mit Elektrostarter den Zündschlüssel Wenden Sie sich an einen autorisierten Honda-Fachhändler, um abziehen. eines der Originalteile auf untenstehender Liste oder andere. 2. Kerzenstecker abziehen. 3. Benzinhahn schließen [1]. HRD536C...
  • Seite 42: Technische Daten

    (2,9 - 4,3 - 4,7 km/h) Schmierung Öl Radantriebsöl Honda HST Öl 15W30 API: CD/SF Ölmengeradantrieb (*) Bei der im vorliegenden Dokument genannten Motor-Nennleistung handelt es sich um die bei der Prüfung eines Motors aus der Fertigung abgegebene Nutzleistung des Motormodells GCV160A, die gemäß SAE J1349 bei 3 600 U/min (Nutzleistung). Motoren der Serienfertigung können von diesem Wert abweichen. Die tatsächlich von dem im endgültigen Gerät eingebauten Motor abgegebene Leistung hängt von zahlreichen Faktoren ab, wie der Einsatzdrehzahl des Motors, den...
  • Seite 43: Introduzione

    Specifiche tecniche ......14 Elenco dei maggiori distributori Honda in Europa ..15 “Dichiarazione di conformità...
  • Seite 44: Norme Di Sicurezza

    In tal caso i pezzi devono essere sostituiti, non riparati. Utilizzare completi. soltanto pezzi originali Honda. Le lame devono sempre recare il marchio Honda UTILIZZO come pure il numero di matricola. Pezzi di qualità differente possono danneggiare C1.
  • Seite 45: Etichette Di Sicurezza

    [31] [30] Queste etichette sono considerate come parti della macchina. Se [33] una di esse dovesse staccarsi o diventare illeggibile, contattare il vostro concessionario Honda per la sua sostituzione. [27] [21] Inoltre vi raccomandiamo di leggere attentamente le istruzioni di...
  • Seite 46: Riparazioni Everifiche Prima Dell'uso

    [8], afferrare il suo numero di ottano sia almeno uguale o superiore à quello l'impugnatura [9] e raccomandato dalla Honda (86). Esistono due tipi di miscele rimuovere il sacco benzina/alcool: uno contenente alcool etilico e l’altro contenente mantenendolo in posizione alcool metilico.
  • Seite 47 Si raccomanda di impiegare necessario sostituirla. un olio Honda 4 tempi o un olio motore di qualità equivalente e ad • Verificare il serraggio delle viti alto potere detergente. Sarà inoltre opportuno scegliere la della lama [5] (vedi capitolo viscosità...
  • Seite 48: Avviamento Earresto Del Motore

    4. Tirare lentamente la maniglia di concessionario Honda autorizzato. Malgrado le adeguate modifiche avviamento [3] con l'altra mano apportate al carburatore, la potenza del motore diminuirà di circa il fino a sentire una resistenza;...
  • Seite 49 7. Per interrompere l'avanzamento del rasaerba rilasciare la leva NOTA: Se la velocità del rasaerba è troppo ridotta quando si taglia di innesto di avanzamento [4]. su un pendio, spostare leggermente la leva di cambio di velocità 8. Per interrompere la rotazione della lama, rilasciare la leva verso la posizione “RAPIDA”.
  • Seite 50: Manutenzione

    • Per la manutenzione o la riparazione utilizzare esclusivamente 3. Predisporre un recipiente [7] ricambi originali Honda o di qualità equivalente: qualsiasi pezzo sotto l'orifizio del tubo di di ricambio di natura diversa rischierebbe infatti di danneggiare il riempimento della coppa rasaerba.
  • Seite 51 Essa dovrà risultare compresa tra 0,7 e 0,8 mm. • Si racommanda di far effettuare la regolazione ad un Qualora una registrazione risultasse necessaria, basterà concessionario Honda. piegare l'elettrodo laterale per avvicinarlo o allontanarlo da quello centrale. Velocità di minimo normale: 1 700 ± 150 giri/min 4.
  • Seite 52 PRECAUZIONI: • Per ottenere la massima efficienza di taglio è indipensabile che la lama sia correttamente bilanciata. • Sarà quindi tassativo sostituire ogni lama danneggiata o svergolata. Utilizzare esclusivamente lame di ricambio originali Honda o equivalenti. 10 IT...
  • Seite 53: Programma Di Manutenzione

    PRECAUZIONI: • In mancanza di chiave dinamometrica [4] chiedere ad un Controllare concessionario Honda autorizzato di eseguire il corretto Candela serraggio di queste viti prima di utilizzare il rasaerba, in quanto Pulire potrebbero allentarsi se insufficientemente avvitate o rompersi nel caso contrario.
  • Seite 54: Individuazione Dei Guast

    (*) La manutenzione di questi punti deve essere affidata ad un residui gommosi che intasano l’impianto di alimentazione. Se la concessionario autorizzato Honda, a meno che l'utente benzina contenuta nel vostro motore si deteriora durante disponga degli attrezzi necessari e sia competente in l’immagazzinaggio potreste dover far sostituire o riparare il...
  • Seite 55: Trasporto

    “ARRESTO” e rimvovere la chiave di contatto. Per acquistare uno dei pezzi di ricambio originali sottoelencati, 2. Togliere il cappuccio della o altri pezzi, contattare un rivenditore autorizzato Honda. candela di accensione. 3. Girare il rubinetto in HRD536C posizione “OFF”...
  • Seite 56: Specifiche Tecniche

    (2,9 - 4,3 - 4,7 km/h) Lubrificazione Olio Lubrificante consigliato Honda HST olio 15W30 API: CD/SF Capacità coppa dell'olio (*) La potenza nominale del motore indicata nel presente documento corrisponde alla potenza netta erogata, testata su un motore di serie per il modello GCV160A e misurata in base a quanto previsto dalla normativa SAE J1349 a 3 600 giri/min.
  • Seite 57 Noteer hier het model van de machine Adressen van Honda-importeurs ....15 “EU-conformiteitsverklaring” OVERZICHT ... . 16 ...
  • Seite 58: Veiligheidsvoorschriften

    Gebruik altijd originele Honda- GEBRUIK onderdelen. Maaimessen moeten zijn voorzien van een Honda-merk en een C1. Laat de motor niet draaien in een gesloten ruimte waar het levensgevaarlijke referentienummer. Niet gelijkwaardige onderdelen kunnen schade veroorzaken koolmonoxide zich kan verzamelen.
  • Seite 59: Waarschuwingsstickers

    [23] Bougiekap MACHINE [24] Uitlaat [25] Vuldop/oliepeilstok ..Olie verversen/oliepeil kontrolerenTevens voor het aftappen Honda France Manufacturing S.A.S. van motorolie Rue des Châtaigniers - Pôle 45 [16] 45140 Ormes - France [26] Benzinekraan .
  • Seite 60: Voorbereidingen Tot Het In Bedrijf Nemen

    [10] [9] zijn van het gebruik van benzine met alkohol. Honda keurt ook niet het gebruik van benzine met methanol goed daar de kwaliteiten hiervan nog niet bewezen zijn voor dit soort motoren.
  • Seite 61 VEILIGHEID LUCHTFILTER KONTROLEREN MAAIHOOGTE VERSTELLEN Wijzigen van de maaihoogte: VOORZICHTIG: • Gebruik de gazonmaaier nooit zonder het luchtfilter. Dit heeft een 1. Stop de motor. versneld slijten van de motor tot gevolg. 2. Trek de handels [10] van de hoogteinstelling naar de wielen en Kontroleer het luchtfilter als stel vervolgens de gewenste hoogte in: handels omhoog voor volgt:...
  • Seite 62: Motor Starten

    “SNEL” [B]. brandstofverbruik toeneemt. Dit kan voorkomen worden door uw Honda dealer een kleinere sproeier te laten monteren en de mengselstelbout te verstellen. Ondanks veranderingen aan de 3. De stuurboom stevig met een carburateur vermindert het motorvermogen met 3,5% per hand vasthouden.
  • Seite 63: Grasvangzak Ledigen

    7. Aandrijving ontkoppelen: hendel [4] loslaten. NB: Indien de snelheid van de gazonmaaier te langzaam is bij het 8. Maaiwerk ontkoppelen: hendel [3] loslaten. maaien van een helling, de schakelhendel heel voorzichtig een stukje naar de stand “SNEL” toe schuiven. BEDIENINGSHENDELS EN MAAI-INSTRUCTIES •...
  • Seite 64: Onderhoud

    1. Verwijder de dop van de vulopening [6] voor de olie. VOORZICHTIG: 2. Zet de maaimachine op de • Bij onderhoud of reparatie mogen alleen originele Honda- rechterkant. onderdelen of producten van gelijkwaardige kwaliteit worden 3. Zet een blik of bak [7] onder gebruikt.
  • Seite 65: Carburateur Afstellen

    VEILIGHEID VOORZICHTIG: vervangen. Een niet al te oude of ingebrande bougie kan • Raden wij u aan deze afstelling door uw Honda dealer uit te laten ontkoold worden. Oudere bougies kunnen beter vervangen voeren. worden.
  • Seite 66 • Het mes moet goed in evenwicht zujn om mooi te kunnen maaien. Vervang dus elk mes dat is beschadigd of waarvan het evenwicht sterk is verstoord. • Gebruik alleen een origineel Honda vervangingsmes of een met gelijkwaardige eigenschappen. 10 NL...
  • Seite 67 [8]. (1) Dit moet vaker worden uitgevoerd in stoffige omstandigheden. 2. Een nieuwe grasvangzak (2) Het onderhoud van dit punt moet door een erkende Honda-dealer. monteren volgens de (3) Houd bij professioneel gebruik de gebruiksuren bij om de onderhoudsbeurten te instrukties gegeven op kunnen plannen.
  • Seite 68: Storingzoeken

    • Benzine veroudert tijdens de opslag. (*) Het onderhoud van deze punten moet worden uitgevoerd Oude benzine veroorzaakt startproblemen harsafzetting door een erkend Honda-dealer, tenzij de gebruiker over de waardoor de brandstoftoevoer verstopt raakt. Als de benzine in nodige gereedschappen en mechanische kennis beschikt.
  • Seite 69: Vervoer

    COURANTE ONDERDELEN, ACCESSOIRES IN VERVOER VOOR OPTIE EN VERBRUIKSPRODUCTEN 1. Plaats de gashendel in Neem contact op met een erkend Honda-dealer voor de aanschaf positie “UIT”. Neem bij van een van de hieronder opgesomde, of andere, originele electrisch gestarte modellen onderdelen.
  • Seite 70: Technische Gegevens

    (2,9 - 4,3 - 4,7 km/h) Smering Huile Aanbevolen smeermiddel Honda HST olie 15W30 API: CD/SF Inhoud (*) Het nominale vermogen van de motor in dit document is het nettovermogen gemeten volgens SAE J1349 en geleverd met een productiemachine GCV160A bij 3 600 omw/min.(Nettovermogen).
  • Seite 71 Direcciones de los principales concesionarios Honda . . . 15 RESUMEN DE CONTENIDO DE 2009 - Honda France Manufacturing S.A.S. - Pôle 45 - Rue des Châtaigniers 45140 ORMES - FRANCE - Todos los derechos reservados “Declaración de conformidad CE” ....16...
  • Seite 72: Instrucciones De Seguridad

    Usar repuestos de origen Honda. Las cuchillas deben llevar siempre la marca Honda así como la referencia. Piezas que no sean C1. No hacer funcionar el motor en un recinto cerrado, en el que puedan acumularse de la misma calidad pueden deteriorar la máquina y perjudicar su seguridad.
  • Seite 73: Etiquetas De Seguridad

    [25] Tapón-indicador de llenado de aceite..... Permite llenar y controlar el nivel del Honda France Manufacturing S.A.S. aceite motor. Permite vaciar el aceite Rue des Châtaigniers - Pôle 45...
  • Seite 74: Preparación Ycomprobaciones Antes Del Uso

    [10] en las gasolina ni los problemas de rendimiento del motor resultante del pestañas [11] de sujeción empleo de gasolina que contenga alcohol. Honda no aprueba el del cortacésped. uso de carburantes que contengan alcohol metílico siempre y [10] [9] cuando su carácter apropiado aún no esté...
  • Seite 75 • Observar si la cuchilla [4] puede aquél resultar gravemente deteriorado. Se recomienda presenta indicios de desgaste, usar un aceite Honda de 4 tiempos, o un aceite para motor, de y cambiarla si fuera necesario. calidad equivalente y altamente detergente. Es conveniente •...
  • Seite 76: Arranque Y Parada Del Motor

    [3] con la otra mano, hasta recomienda haga efectuar estas modificaciones en el carburador notar una resistencia, y luego por su concesionario Honda autorizado. Aun contando con las tirar con fuerza. adecuadas modificaciones al carburador, disminuirá la potencia del NOTA: No dejar que el lanzador motor en unos 3,5 % por cada 300 m de aumento de altitud.
  • Seite 77 7. Para detener el avance de la máquina, soltar la palanca de NOTA: Si resulta demasiado reducida la velocidad de la máquina embrague de avance [4]. al trabajar en una ladera, desplazar ligeramente la manecilla de cambio de velocidad hacia la posición “RÁPIDO”. 8.
  • Seite 78: Mantenimiento

    1. Retirar el tapón [6] del tubo • Para el mantenimiento o las reparaciones, utilizar únicamente los de llenado de aceite. recambios de origen Honda. Recambios de calidad distinta 2. Inclinar el cortacésped en su podrían dañar el cortacésped. lateral.
  • Seite 79 SEGURIDAD PRECAUCIÓN: 3. Medir la distancia entre los electrodos por medio de un juego de • Le recomendamos se dirija a su distribuidor Honda para su calces de espesor: debe estar comprendida la distancia entre ajuste. 0,7 y 0,8 mm. Si resulta necesario un reglaje de la misma, basta con torcer con cuidado el electrodo lateral.
  • Seite 80: Montaje Y Desmontaje De La Cuchilla

    PRECAUCIÓN: • Resulta esencial el equilibrio de la cuchilla para conseguir buenas prestaciones en el corte. Por tanto es preciso cambiar una cuchilla deteriorada o cuyo equilibrio no pueda restablecerse. • No usar sino cuchilla de recambio Honda. 10 ES...
  • Seite 81: Montaje De La Cuchilla

    PRECAUCIÓN: y estado de la • Si no dispone de llave dinamométrica [4], haga que un misma concesionario Honda homologado apriete los tornillos de la cuchilla apropiadamente antes de utilizar la máquina. Comprobar Bujía de • Los tornillos de cuchilla que estén excesiva o insuficientemente...
  • Seite 82: Diagnóstico De Averías

    [6]. Esto evitará que el (*) El mantenimiento de estos puntos deberá ser realizado por combustible se contamine un concesionario oficial Honda, a menos que el usuario debido a la disolución de disponga de las herramientas y los conocimientos técnicos partículas del recipiente, lo que...
  • Seite 83: Transporte

    RECAMBIOS, ACCESORIOS OPCIONALES Y 1. Poner la manecilla de CONSUMIBLES mando de gas en la Póngase en contacto con un distribuidor oficial Honda para posición “PARADA”, y comprar alguna de las piezas originales relacionadas a quitar la llave de contacto continuación, o para cualquier otro recambio.
  • Seite 84: Especificaciones Técnicas

    Lubricación Aceite Lubricante recomendado Honda HST Aceite 15W30 API: CD/SF Capacidad de aceite (*) La clasificación de potencia del motor al que se hace referencia en este documento corresponde a la potencia producida neta probada en un motor a la venta para el modelo GCV160A y medida de acuerdo con la norma SAE J1349 a 3 600 rev./min.
  • Seite 85: Adressen Van Honda-Importeurs

    Major Honda distributor addresses Adresses des principaux concessionnaires Honda Adressen derwichtigsten Honda-Haupthändler Elenco dei maggiori distributori Honda in Europa Adressen van Honda-importeurs Direcciones de los principales concesionarios Honda AUSTRIA FRANCE NORWAY SPAIN & LAS PALMAS PROVINCE Honda Austria Branch of Honda Motor Europe Ltd.

Diese Anleitung auch für:

Hrd536chxea

Inhaltsverzeichnis