Werbung
4. The fluff filter(s) is/are clogged.
5. Incorrect load volume.
1. The appliance is not installed on a
level, dry and solid floor.
2. The (external) water drain hose is not
installed properly.
3. The fluff filter(s) is/are clogged.
4. The door seal is soiled.
D
RYING LEVEL HAS NOT BEEN REACHED
1. The fluff filter(s) is/are clogged.
2. The water container is full.
3. Selected programme is unsuitable.
4. Load volume is too big.
P
OSSIBLE CAUSE
T
HE DRYING PERIOD ENDS SHORTLY AFTER THE START OF THE
1. Not enough clothes in the appliance.
Clothes are too dry for the selected
programme.
If the appliance has a malfunction not listed in the table above, or if you have
checked all items in the above table but the problem still exists, please contact the
aftersales service.
8.1 Error codes
E
RROR CODE
1. Water container is
E0
2. Failure of the drain
W
ATER LEAKAGE
M
ALFUNCTION
(
)
S
PROGRAMME
T
HE INDICATOR
P
(
OSSIBLE CAUSE
full.
pump.
4. Clean the fluff filter(s).
5. Check that the appliance is not
overloaded.
.
1. Align the appliance horizontally.
2. Install the (external) water drain hose
properly.
3. Clean the fluff filter(s).
4. Clean the door seal.
/
DRYING
1. Clean the fluff filter(s).
2. Empty the water container.
3. Select a drying programme suitable
for the laundry to be dried.
4. Reduce the load.
M
.
«E
»
ND
IS DISPLAYED
1. Select a drying programme suitable
for the laundry to be dried.
)
S
1. Empty the water container.
2. Switch
appliance, close the water tap and
contact the aftersales service.
~
~
88
-
TIME IS TOO LONG
(
)
EASURE
S
M
(
)
EASURE
S
off
and
unplug
.
the
Werbung
