Werbung
5. As soon as the count-down time has reached the starting time of the drying
programme, the drying programme starts and the display indicates the remaining
drying time.
6. If you wish to cancel the delayed programme start after pressing the
«S
/P
TART
AUSE
must switch off the appliance using the «O
➢ It is 2:00 p.m. (24-hours display: 14:00 o'clock)
➢ You set a drying programme with a running time of 2.00 hours.
➢ The drying programme is to end at 5:00 p.m. (24-hours display: 17:00 o'clock).
➢ You set the delay period to 3 hours (2:00 p.m. → 5:00 p.m. = 3 hours).
➢ The drying programme starts at 3:00 pm (15:00 o'clock) and ends at 5:00 pm
(17:00 o'clock).
The «D
ELAYED
not be available for all programmes (depending on model).
If the selected drying programme cannot be combined with the desired functions,
these functions cannot be selected or will be cancelled and the indicators switches
off automatically.
5.4.4 Activation of the crease protection
F
UNCTION
❖ Using this function, you can activate the crease protection for a drying
programme manually.
❖ C
REASE PROTECTION
textiles from creasing. The drum rotates intermittently during the drying
programme to protect textiles from creasing. The crease protection starts
automatically at the end of a dryer programme.
❖ The duration of the manually set crease protection is 180 minutes. After the time
has elapsed, the function is deactivated automatically.
➢ To activate the crease protection for a drying programme manually, press and
hold the «C
REASE PROTECTION
crease protection («
Depending on model.
25
»-
(but before the drying programme has started), you
BUTTON
-
-
PROGRAMME
START
«C
REASE PROTECTION
SELECTION OF THE CREASE PROTECTION
(Ger.: Knitter Schutz): The crease protection protects
»-
») is indicated on the control panel.
/O
»-
N
FF
E
XAMPLE
(Ger.: Startzeitvorwahl)»-
(Ger.: K
. The operational status indicator of the
BUTTON
~
~
79
(G
.: E
BUTTON
ER
IN
FUNCTION
)»:
NITTERSCHUTZ
25
/A
).
US
may
Werbung
