SOMFY RU Basic 28 WF RTS Li-ion II Anleitung Seite 18

EN
Observations
The motorised product
stops before its end limit.
3.5.2.Adding/Deleting Somfy control points
NOTICE
Orange LED blinks slowly when adding or
deleting a remote control.
3.5.2.1.Using a control point that has been previously programmed to
the motorised product
1] Press and hold the Prog. button (A) on the
programmed control point until the
motorised product briefly moves up and
down.
ð Green LED blinks 5 times then orange
LED blinks slowly.
2] Quickly press the Prog. button (B) on the
control point to add or delete.
g Green LED blinks 5 times.
3.5.2.2.Using the Programming button on the drive head
1] Press and
programming button until the motorised
product briefly moves up and down.
ð Green LED blinks 5 times then orange
LED blinks slowly.
2] Quickly press the Prog. button (B) on the
control point to add or delete.
18
Possible causes
Thermal protection of the
drive is on (Red LED blinks
slowly).
The drive has detected an
obstacle (solid Red LED).
hold the drive
©
Copyright 2020 SOMFY ACTIVITES SA. All rights reserved.
RU Basic 28 WF RTS Li-ion II
Solutions
Wait for the drive to cool
down (Red LED will stop
blinking when drive is ready
to use).
Move the motorised
product in the other
direction.
1]
Prog. A
head
1]
2]
Prog. B
2]
Prog. B