SOMFY RU Basic 28 WF RTS Li-ion II Anleitung Seite 14

EN
→ All programmed control points are deleted and
green LED blinks 5 times.
2.4.6.Erasing the memory of the drive (factory default)
To reset the drive, press and hold the drive head
programming button until the motorised product
briefly moves up and down 3 times.
→ All the settings are erased. Green LED blinks 5
times then orange LED is fixed on.
2.4.7.Temporary sleeping mode
CAUTION
The motorised product must be programmed.
NOTICE
The drive will not respond to any control points commands for 15 minutes
1] Press and
programming button until the motorised
product briefly moves up and down.
2] Briefly press the drive head programming
button, the motorised product briefly
moves up and down twice.
g "Sleeping mode" is activated, green
LED blinks 5 times to confirm, then
orange LED blinks every second as
long as the drive is in the temporary
sleeping mode.
3] To deactivate the "Sleeping mode", briefly
press the drive head programming button.
g The motorised product briefly moves
up and down, the control point
commands are enabled. Green LED
blinks 5 times.
14
hold the drive
©
Copyright 2020 SOMFY ACTIVITES SA. All rights reserved.
RU Basic 28 WF RTS Li-ion II
head
1]
2]
3]
3x
2x