SOMFY RU Basic 28 WF RTS Li-ion II Anleitung Seite 10

EN
2.4.Tips and advice on Installation
2.4.1.Questions about the drive?
Observations
The motorised product
does not operate.
10
Possible causes
Drive battery is low and
requires charge. Red LED
blinks 5 times when any
button of a paired control
point is pressed.
The control point battery is
low. LED doesn't light
when any button of a
paired control point is
pressed.
The control point is not
compatible or not
programmed. LED doesn't
light when any button of
control point is pressed.
An obstacle hinders the
movement of the
motorised product. The
Red LED lights fixed on.
Drive position is out of the
end limits. Red LED blinks 2
times intermittently and
continually.
Motor is neither set nor
paired. Orange LED lights
fixed on.
The thermal protection has
activated. LED blinks red
continuously.
©
Copyright 2020 SOMFY ACTIVITES SA. All rights reserved.
RU Basic 28 WF RTS Li-ion II
Solutions
Plug in the charger.
Check the battery and
replace it as required.
Check the compatibility or
pair the control point as
required referring to
Adding/Deleting Somfy
control points [} 18].
Remove the obstacle.
Proceed to Setting the
end limits [} 8].
Proceed to
Commissioning [} 7].
Wait for the drive to cool
down (LED will switch off)