Prior To Initial Use; Getting Acquainted With Your Appliance; Touch Control Sensors; Residual Heat Indicator - Rommelsbacher CT 2215/IN Bedienungsanleitung

Prior to inital use
Wipe the appliance prior to the initial use with a damp cloth and dry it thoroughly. For more
detailed information please refer to "Cleaning and maintenance".
Place the appliance on a heat resistant, stable and even surface (non-ferrous) and do not operate
it in the vicinity of other sources of heat (oven, gas flame, etc.). The space above the appliance
has to be kept free; the distance to all walls must be at least 10 cm. Stay 1 m away from
appliances being sensitive to electromagnetic fields. Unhindered air supply has to be ensured.

Getting acquainted with your appliance

Touch control sensors

The appliance is equipped with touch control sensors which grant an easy and convenient handling.

Residual heat indicator

The appliance is equipped with a residual heat indicator which shows whether the cooking zone
is still hot.
• When the appliance is disconnected from the mains, the sign in the "temp" display (7b) disappears.

Pot recognition

The appliance features a sensor which recognizes whether there is a vessel on the cooking zone.
• If a pot is removed from the cooking zone during operation, the "temp" display (7b) will show a blin-
king "---" and the display "power" (7c) will show "-" and also an alternate warning signal will sound.
If a pot is re-placed within 15 seconds, the cooking process will continue with the level last set
and an operating time that might have been set before will continue to run. However, if no pot is
recognized within 15 seconds, the appliance will switch automatically into the standby mode.
24
• Touching the sensor with your finger activates the
relevant function and an acoustic acknowledgement
signal.
NOTE: Always keep the control panel clean and dry.
Do not touch it with wet fingers and do not use it as a
shelf of deposit as this might lead to malfunctions.
• If the temperature of the cooking zone has
reached a value of more than 50 °C due to
the waste heat emitted by the pot, the
"temp" display (7b) shows "-H-" for HIGH.
• As soon as the temperature has dropped
below 50 °C the "temp" display (7b)
shows "-L-" for LOW
• If no suitable vessel is recognized on the
cooking zone after switch-on, the "temp"
display (7b) will show "---" and the display
"power" (7c) will show "-", also an alter-
nate warning signal will sound.
If no pot is recognized within 15 seconds,
the appliance will switch automatically
into the standby mode.