Setting The Operating Time (Timer) - From 1 To 99 Minutes; Switching-Off - Rommelsbacher CT 2215/IN Bedienungsanleitung

Setting the operating time (timer) – from 1 up to 99 minutes
The timer can be activated in the "power level" mode as well as in the "temperature level"
mode.
NOTE: Changing the power or temperature
level will not affect the set operating time.

Switching-off

• For activating the "timer" mode touch
the "+" sensor (4). The appliance auto-
matically switches into the "timer" mode.
The display (7a) shows "01", this means
an operating time of 1 minute.
OR
• For activating the "timer" mode touch
the "-" sensor (4). The appliance auto-
matically switches into the "timer" mode.
The display (7a) shows "60", this means
an operating time of 60 minutes.
• By touching the "+" sensor (4) you can
increase the operating time in minute
intervals up to 99 minutes.
• By touching the "-" sensor (5) you can re-
duce the operating time in minute inter-
vals.
• By continuously pressing the "+" sensor
(3) or "-" sensor (5) you can increase or
reduce the operating time in 5-minute
intervals.
• Start of the timer: The timer starts
automatically 5 seconds after timing.
• Stop of the timer: When the set time has
elapsed, an acoustic signal sounds and
the controller switches automatically to
„standby" mode. The „00" in the display
(7a) can be cleared by touching any sensor.
• For switching-off touch the main switch
sensor (1).
• The display "temp" (7b) shows "-L-" or
"-H-", depending on the residual heat on
the cooking zone. Also an audible signal
sounds. Now the control is in standby
mode.
29