Fan; Operating Time Restriction; Priority Regulation; Recessed Grips For A Safe Transport - Rommelsbacher CT 2215/IN Bedienungsanleitung

Fan

After switch-on an inside fan starts working, which cools the interior parts of the appliance in
order to prevent the appliance from overheating.
It is normal for the fan to continue running in the standby mode after a long operation time.

Operating time restriction

The operating time restriction will cause the cooktop to switch automatically in the standby
mode if the settings have not been changed for a period of 2 hours. This happens independently
of the respectively set level.
After an automatic switch-off the cooking plate can be turned on once again and the maximum
operating time will be active again.

Priority regulation

Although any other sensor is still activated, the appliance may be brought to the standby mode
at any time during operation by touching the associated main switch sensor.

Recessed grips for a safe transport

At the left and right side below the casing there are practical recessed grips with ribbing, which
ensure an easy and convenient transport of the appliance.

Operating the appliance

Standby mode

Switching-on

NOTE: If there is no further activation within 60 seconds after switch-on, the control will switch
back to the standby mode.
• Connect the mains plug with the power
socket.
• The "temp" display (7b) shows "-L-" or
"-H-", depending on the residual heat of
the cooking zone. Also an acoustic signal
is audible.
The control is in standby mode.
• Place suitable cookware on the middle
of the cooking zone.
• For switching-on touch the main switch
(1). The LED "ON/OFF" (8) is flashing.
• Now decide on the cooking mode you
would like to work with.
25