Installation; Built-In Appliances; Connection Cable - AEG HC452600EB Benutzerinformation

cooking surface) and an error message
that comes on.
If you operated the appliance incorrect-
ly, the servicing by a customer service
technician or dealer will not be free of

8. INSTALLATION

WARNING!
Refer to the Safety chapters.
Before the installation
Before the installation of the appliance,
record the information below from the
rating plate. The rating plate is on the
bottom of the appliance casing.
• Model ...........................
• PNC .............................
• Serial number ....................

8.1 Built-in appliances

• Only use the built-in appliances after
you assemble the appliance into cor-
8.3 Assembly
R 5mm
55mm
490 mm
+1
340 mm
+1
charge, even during the warranty period.
The instructions about the customer
service and conditions of guarantee are
in the guarantee booklet.
rect built-in units and work surfaces
that align to the standards.

8.2 Connection cable

• The appliance is supplied with the
connection cable.
• Replace the damaged mains cable
with a special cable (type H05BB-F
Tmax 90°C; or higher). Speak to your
local Service Centre.
If, you use the accessory frame C-
FRAME, first read the instruction sup-
plied with the frame before you install
the appliance.
min.
500mm
ENGLISH
33
min.
50mm
min.
2mm