Use Of Rinse Aid - AEG Electrolux FAVORIT 52860 Benutzerinformation

30

Use of rinse aid

When you set the water softener to level 1, the salt indicator light does not stay on.
Use of rinse aid
CAUTION!
Only use branded rinse aid for dishwashers.
Do not fill the rinse aid dispenser with other products (e.g. dishwasher cleaning agent, liquid
detergent). This can cause damage to the appliance.
Rinse aid gives spot and streak free dry.
Rinse aid is automatically added in the last rinse.
Do these steps to fill the rinse aid dispenser:
1. Press the release button (A) to open the rinse aid dispenser.
2. Fill the rinse aid dispenser with rinse aid. The maximum level is shown by "max".
3. Remove the spilled rinse aid with an absorbent cloth to prevent too much foam during
the subsequent washing programme.
4. Close the rinse aid dispenser.
The capacity of the rinse aid dispenser is approximately 150 ml. The quantity of rinse aid is
sufficient for approximately 60 washing programmes.
Adjust the dosage of rinse aid
The appliance is set at the factory at level 1.
You can set the dosage between 1 - 6 (1- 6 ml of the rinse aid).
To adjust the dosage of rinse aid, refer to the washing results ("What to do if..."). Start with
the lowest dosage.
Turn the arrow clockwise to increase the dosage.
Increase the dose if there are water droplets or limescale on the dishes.