Herunterladen Diese Seite drucken

Cleanmaxx Rotation Power Gebrauchsanleitung Seite 11

Milbensauger

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Mite Vacuum Cleaner Rotation Power
Make sure that the connecting cable is
always kept out of the reach of small
children and animals. There is a danger
of strangulation.
Lay the connecting cable in such a way
that it does not present a trip hazard.
Keep animals, hair, jewellery, wide
clothing, fingers and all other body parts
away from the suction opening of the
device. They could become stuck to the
device.
WARNING – Danger of Fire!
Do not cover the device during opera-
tion in order to prevent it from catching
fire. Do not insert anything into the
openings of the device and make sure
that these do not become clogged.
NOTICE – Risk of Damage to
Material and Property
Only connect the device to a plug socket
that matches the technical data of the
device. The plug socket must also be
readily accessible after connection so
that the connection to the mains can
quickly be isolated.
Only use suitable extension cables
whose technical data is the same as that
of the device.
Make sure that the connecting cable is
not squashed, bent or laid over sharp
edges and does not come into contact
with hot surfaces.
The device must be switched off when
inserting or removing the mains plug.
Pull the mains plug out of the plug sock-
et if an error occurs during operation or
before a thunderstorm.
Always pull the mains plug and never
the mains cable to disconnect the device
from the mains power. Never pull or
carry the device by the mains cable.
Protect the device from heat, flames,
sub-zero temperatures, persistent mois-
ture, wet conditions and impacts.
15172_15175_Inlay_DE-EN_A5_V1.indb 11
15172_15175_Inlay_DE-EN_A5_V1.indb 11
Use only original accessories from the
manufacturer in order to guarantee that
there is no interference that may prevent
the device from working and to avoid
possible damage.
Do not lay heavy objects on the device
or the connecting cable.
SAFETY DEVICE
The device has a sensor (14) that serves as a
safety switch.
The UV-C lamp (15) only switches on when
the bottom of the device is less than 5 cm
away from the surface.
If the sensor is further away from the sur-
face, the automatic switch-off function is
activated and the UV-C lamp stops being lit.
TIPS AND NOTES
Always clean mattresses on both sides.
We recommend cleaning new mat-
tresses once a month. Older mattresses
should initially be cleaned every day for
a week. We then recommend cleaning
them once a month.
USE
Please Note!
The device should only be used if it has
been fully and correctly assembled!
The dust container and the filters
must be inserted and must not be
damaged! If the dirt were to get inside
the motor unit, this could damage the
motor.
Make sure that the sensor is not dirty!
1. Insert the mains plug into a plug socket.
2. Place the device down flat on the sur-
face which is to be cleaned.
3. Press the
 button (2) to switch on the
device. The device starts to vacuum and
the UV-C lamp (15) and the ultrasonic
EN
11
22.08.2024 10:29:25
22.08.2024 10:29:25

Werbung

loading

Diese Anleitung auch für:

1517515172