Crivit FC-13564 Bedienungsanleitung Seite 22

• If you come into contact with battery acid,
wash the affected area with soap and water� If
battery acid gets in your eye, rinse it with wa-
ter and seek medical attention immediately!
• The connection terminals must not be
short-circuited�
Remove protective strips/
insert batteries (Fig. B)
WARNING! Observe the following
instructions to avoid mechanical
and electrical damage.
Note: remove the protective strip (1b/4b)
before using the product for the first time�
Proceed as follows:
1� Using a coin, unscrew the battery compart-
ment covers (9) and (10) anti-clockwise
from the bicycle computer (1) and the
sensor (4)�
2� Remove the battery (7) from the battery
holder�
3� Remove the protective strip in each case�
4� Insert the battery again each time�
Note: pay attention to the plus/minus poles
on the batteries and to the symbol in the
battery compartment in order to insert the
batteries correctly�
22 GB