Crivit URBAN E-BIKE X.3 Originalbetriebsanleitung Seite 49

Error messages on the display
Note the counting method for the LEDs from bottom to top.
LED display
Full declarations of conformity are available at: https://crivit-bikes.com/service/
FAQs
You can find FAQs and other updated information at: https://crivit-bikes.com
Error code
21
24
26
27
28
30
Scan the accompanying QR code with your smartphone camera for direct access to the internet page.
Description
Overcurrent
Motor/Sensor cable
Undervoltage
Torque sensor error
Controller overheats
Display controller has lost commu-
nication
Remedy
Restart motor system after 2 minutes.
If the error persists, please contact
Customer Service.
Please contact Customer Service.
Restart motor system after 2 minutes.
If the error persists, please contact
Customer Service.
Restart motor system after 2 minutes.
If the error persists, please contact
Customer Service.
Restart motor system after 2 minutes.
If the error persists, please contact
Customer Service.
Restart motor system after 2 minutes.
If the error persists, please contact
Customer Service.
GB 49