Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1.
Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer
We hope your new device brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability
laws, the manufacturer of this device assumes no lia-
bility for damage to the device or caused by the device
arising from:
• Improper handling,
• Failure to comply with the operating instructions,
• Repairs carried out by third parties, unauthorised
specialists,
• Installing and replacing non-original spare parts,
• Application other than specified,
• Failures of the electrical system in the event of the
electrical regulations and VDE provisions 0100, DIN
57113 / VDE0113 not being observed.
Note:
Read the whole text of the operating manual before as-
sembly and commissioning.
This operating manual should help you familiarise
yourself with your power tool and teach you how to use
it for its intended purpose.
The operating manual include important instructions
for the safe, proper and economic operation of the
power tool, for avoiding danger, for minimising repair
costs and downtimes and for increasing the reliability
and extending the service life of the power tool.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the power tool in your country.
Keep the operating manual package with the power
tool at all times and store it in a plastic cover to pro-
tect it from dirt and moisture. They must be read and
carefully observed by all operating personnel before
starting the work. The power tool may only be used
by personnel who have been trained to use it and who
have been instructed with respect to the associated
hazards.
The required minimum age must be observed.
24 | GB
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such machines must also be observed.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
2. Device description (Fig. 1, 2)
1.
Air filter
2.
Safety valve
3.
Pressure vessel
4.
Wheel (2x)
5.
Foot (2x)
6.
Drain screw for condensate
7.
Quick coupling (regulated compressed air)
8.
Pressure regulator
9.
Pressure switch
10. On/off switch
11. Transport handle
12. Pressure gauge (set pressure can be read off)
13. Oil drain screw
14. Oil sight glass
15. Compressor pump
16. Oil plug / oil filling opening
17. Nut (wheel)
18. Screw (wheel)
19. Nut (foot)
20. Screw (foot)
3. Scope of delivery
• 1x air filter
• 1x feet
• 2x wheels
• 1x assembly material
• 1x oil plug
• 1x oil bottle
• including a 13-piece accessory set (for item number
59061749969) (not pictured)
• 1x operating manual
4. Proper use
The compressor is used to generate compressed air
for pneumatically powered tools that can be operated
with an air rate of up to 127 l/min. (e.g. tyre inflaters, air
blow guns, paint spray guns).
www.scheppach.com
Werbung
