Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OPerAtION
2. Mark the correct distance between the holes on the wall (Fig. 1).
3. Only use the screws supplied with the appliance (4).
4. Guide the cable of the mains adapter (5) through the opening (Fig. 2).
WArNINg:
Never place the station on a container filled with water, full bathtubs, washbasins,
heat sources, stoves, ovens or other similar objects.
5. Place the charging station so that the appliance and the mains cable are out of
the reach of children.
The charging station must be turned upwards, so that the appliance can be
attached with the dust container (10) facing downwards.
Preparing the appliance
1. Take the appliance out of the box and remove the inner and outer packaging.
2. Make sure that the dust filter (11) is inserted correctly (see section "Emptying
the container and cleaning the filter").
3. Make sure that the on/off switch (14) is turned to OFF (switched off).
4. Connect the mains adapter (5) to the socket.
5. Insert the appliance into the charging station (2) to charge it (see section
"Recharging the appliance").
Note: Make sure the appliance is connected to the charging station for at least 14
hours without interruption when charging it for the first time.
Using the appliance for dry vacuuming
Fig. 3
2023-11 SIMPEX Basic Akku-Handstaubsauger wet-dry 33078.indd 27
Fig. 4
27
19.01.24 14:07
Werbung
