Encoder (Feedback Codes Gc, Gd - S300 - Kollmorgen AKM1 Betriebsanleitung

9.1.5 Encoder (Feedback codes GC, GD - S300...S700 drives only)
AKM Installation | 9 Connector Pinout
Pin Function Pin Function
1 TH + 7 Data -
2 TH - 8 Sin +
3 n.c. 9 Cos +
4 Sin - 10 Up
5 Cos - 11 0V
6 Data + 12 n.c.
Kollmorgen | May 2016 193