Safety Information
12
Safety Information
Documentation reference symbol.Ifthe product is markedwith this
symbol,refer to the product documentation to get more information
about the product.
WARNING
A WARNING in the manual denotes a hazard that can cause injury
or death.
Caution
A Caution in the manual denotes a hazard that can damage equip-
ment.
Do not proceed beyond a WARNING or Caution notice until you
have understood the hazardous conditions and have taken appro-
priate steps.
Grounding
These are safety class I products and have protective earthing terminals. There
must be an uninterruptible
to the product's input wiring terminals, power cord, or supplied power cord
set. Whenever
it is likely that the protection
the power cord until the ground has been restored.
For LAN cable grounding:
If your LAN covers an area served by more than one power
distribution
system, be sure their safety grounds are securely
interconnected.
LAN cables may occasionally
voltages
(such as lightning
power grid). Handle exposed metal components of the network with
caution.
Servicing
There are no user-serviceable parts inside these products. Any servicing,
adjustment,
maintenance,
personnel.
These products do not have a power switch; they are powered on when the
power cord is plugged in.
safety earth ground from the main power source
has been impaired,
be subject
to hazardous
or disturbances
in the electrical
or repair must be perfornmed only by service-trained
disconnect
transient
utilities